Catalog
Search
Survey
Online Chat

Printer friendly version Printer friendly version

Senheisser e-912 WH Instrument Microphone

Rate it
Rp. 3.700.000
Out of stock
General Description

The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.
The e 912 S can be switched on and off via an integrated membrane switch.

Features
  • Programmable membrane switch
  • Very unobtrusive due to flat design
  • Extremely rugged sound inlet basket
  • Rubber damping plate on base
  • Mounting slots for mounting the microphone to table tops, lecterns, etc.
  • Gold-plated XLR connector
  • Integrated electronics (instead of in-line preamp)
  • An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
  • The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
  • The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
  • With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).
Technical Data
Transducer principle (Microphone) pre polarised condenser microphone
Pick-up pattern half-cardioid
Frequency response (microphone) 20 Hz - 20 kHz
Sensitivity in free field, no load (1kHz) 6 (10) mV/Pa Depending on adjusted frequency response curve.
Impedance < 100 Ohm
Min. terminating impedance 1 kOhm
Maximum sound pressure level (passiv) 134 dB SPL
Equivalent noise level 26 dB (A)
Equivalent noise level weighted as per CCIR 468-3 37 dB
Phantom powering P48
Current consumption 2,8 mA
Connector XLR-3
Weight 550 g
Dimensions 126.5 x 105 x 26.5 mm

 

Any questions?

Please use the following form to request information.

Your name:

Email

Please specify your question about Senheisser e-912 WH Instrument Microphone:


Type the numbers you see in the picture below
code

Our Family

(empty)
 
Blog / News
Subscribe for email newsletter (blog):
or RSS 2.0

Partner